Porsche 911 Carrera S Paint Correction Detail.

This Porsche 911 Carrera S in Basalt Black was scheduled in for a Paint Correction Detail to remove swirl marks and scratches to enhance and improve the paintwork condition.

This 911 was also being prepared ready to be shipped to Australia. 

First up a pre detail inspection on the car.

An application of a citrus pre wash and snow foam was applied to soften built up dirt and grime that has accumulated.  

With the snow foam dwelling on the car a full chassis clean was undertaken, to remove years of built up dirt and road grime.

All intricate areas, such as door jams, door shuts, window rubbers and all exterior trim were fully degreased. 

Alloy wheels where thoroughly cleaned.

Tyres and wheel arches where degreased.

Convertable roof was given a thorough clean ready for protection later. 

Once the snow foam and citrus pre wash had done its job, the Porsche was thoroughly rinsed ready to receive the 2 bucket safe wash.

Now the Carrera was fully washed the attention was getting the car fully decontaminated, starting with a Iron Fallout Remover, Tar Remover and a Full Clay Bar Treatment. 

Once fully decontaminated, one final wash down, ready for paint readings and a paint inspection. 

Plenty of scratches and swirl marks!

A before and after comparison.

A before and after comparison.

A before and after comparision.

A before and after comparison.

A 50:50 shot of the drivers door.

Once the 3 stage machine polishing process was complete, it was time to get the car ready for protection on the interior and exterior.

The leather seats were given a deep clean with Dr Leather and then treated with Gyeon Leather Coat, which repels liquids and withstands friction and mechanical wear.

The dashboard, door cards and interior trim surfaces were given a thorough clean and then treated to Gtechniq C6 Matte Dash, once applied to the surfaces it removes 99.9% of bacteria.   

The convertible roof was treated with Gtechniq I1 Smart Fabric, whilst offering great durability and fantastic hydrophobic properties. 

The glass, wheels, and exterior trim surfaces were also protected with our own branded products.

The paintwork was protected with our own branded sealant and wax offering 12 months + of protection.

Keep your eyes peeled for updates on our own products coming soon!

The final results.

If you are a Porsche owner, or would like this level of detailing performed to your car, then please get in touch.

 

Mini John Cooper Works Clubman S Paint Enhancement Detail

This Mini John Cooper Works Clubman S in Absolute Black was booked in for a Paint Enhancement Detail to remove swirl marks and scratches to enhance the paintwork. 

Pre detail inspection of the vehicle.

Plenty of road grime on the lower parts of the car.

Citrus pre wash and an application of snow foam to soften dirt.

Once the snow foam and citrus pre wash had done its job the Mini was thoroughly rinsed ready for the 2 bucket safe wash.

Once fully washed the bodywork, glass and wheels were treated to a Iron and Fallout Remover, Tar Remover and a Full Clay Bar Treatment.

Once the Mini had been fully decontaminated, it was time to inspect the car under lights ready for machine polishing.

Rupes polishing system with Meguiars polishes being the combination choice.

Some 50/50 shot of the polishing process. 

Exhaust given a polish to remove the build up of carbon.

The leather seats were given a deep clean with Dr Leather and then treated with Gyeon Leather Coat which repels liquids and withstands friction and mechanical wear.

50/50 shot of the leather after being treated.

The dashboard, door cards and interior trim surfaces were finished with Auto Finish Spritz.

The alloy wheels were sealed and proteced with Gtechniq C2 Liquid Crystal. 

All exterior painted surfaces were treated to Auto Finesse Fusion Wax, leaving a high gloss finish.

The final results.

If you are a Mini owner or wish to have a similar level of detailing performed then please get in touch.

BMW Z4 Paint Correction Detail

This BMW Z4 in Metallic Black Sapphire was scheduled for a Paint Correction Detail, to remove swirl marks and scratches in the paintwork.

Customer also opted for the 19" M Sport wheels and kidney grills to be sprayed in Matte Black Plasti Dip. 

Pre detail inspection of the vehicle followed up by snow foam and a citrus pre wash to remove as many particles of dirt and bonded road grime.

Next up the engine bay went through an extensive clean to remove grime, dirt and dust.

Once the engine bay had been cleaned, we moved onto getting the vehicle completely washed ready for the 3 stage decontamination process.

Bodywork, glass and wheels were treated to a Iron and Fallout Remover, Tar Remover and a Full Clay Bar treatment.

Once the BMW was fully decontaminated it was brought inside to for a full inspection and paint thickness measurements.

Once the car was under lights it was evident there were plenty of swirl marks, scratches and holograms in the paintwork. 

Rupes machine polishers and pads with Meguiars 105 and 205 was the combination for this specific BMW.

The boot lid on this Z4 through up a surprise with a bird stain which had etched into the paintwork. 

After trying to polish the stain out of the paintwork and getting no where, it was time to attack this with some 3000 grit sandpaper. 

After completing the polishing process it was time to apply Gtechniq G1 and G5 to the exterior glass.

The customer had opted for Gtechniq G1 Smart Glass on the windscreen and G5 Max Repellent on the side and rear glass for better visibility in the rain,sleet,fog and snow ready for winter.

The dashboard, door cards and interior trim surfaces were thoroughly cleaned with Auto Finesse Total and finished with Auto Finesse Spritz.

Dr Leather used to clean the leather seats, once fully dried Gyeon Leather Coat was applied to the leather which repels liquids and withstands friction and mechanical wear.

3 coats of Auto Finesse Fusion Hybrid Wax was applied to the car to give that sharp look and outstanding finish.

The Final Results.

If you have a BMW or would like a similar level of detailing performed on your car then please get in touch.

BMW Z4 Paint Correction Detail

This stunning example BMW Z4 in Alpine White with Coral Red interior, was scheduled for our Paint Correction Service. 

First up a citrus pre wash and snow foam was applied to the vehicle to remove large particles of dirt and help loosen bonded road grime.

After allowing the snow foam and citrus pre wash to dwell the BMW wash thoroughly rinsed.

Next up the engine bay went through an extensive clean to remove unwanted grime.

Once the engine bay had been cleaned, we moved on to getting the vehicle completely washed ready for decontamination.

An Iron and Fallout remover was applied which acts on bonded iron particles via a chemical reaction which can be clearly seen turning purple.

The Z4 was then fully rinsed and then moved inside were we performed a full clay bar treatment.

The picture below clearing showing there was still more contamination in the paintwork even after a full wash and decontamination process.

The BMW was then full rinsed again the brought back inside and fully dried.

Once the engine was fully dried and a designated dressing was applied to give that factory fresh look.

Next up was the interior, all surfaces were full cleaned.

All leather surfaces were thoroughly cleaned with Dr Leather and then Protected with Gyeon Leather Coat which repels liquids and withstands friction and mechanical wear.

The floor mats were wet vacuumed, Once fully dried they were treated to Gtechniq I1 which prevents water seeping into the carpets.

And of course no interior is complete unless you have stripey floor mats.

These 19" M Sport wheels were given a full wash and decontamination followed up with a full clay bar treatment, then treated to a designated wheel sealant.

The exhaust system on this Z4 had plenty of carbon build up, this was polished with a metal polish.

The vehicle received a 2 stage machine polish with the Rupes polishing system which brought back that lovely Alpine White paintwork back to life.

The paintwork was protected with Auto Finesse Tough Coat.

The final results.

If you are a BMW owner or wish to have a similar level of detailing performed then please get in touch.